Cisco TrustSec Configuration Manual page 188

show platform cts reflector
show platform cts reflector
To display the status of the Cisco TrustSec reflector mode (Ingress, Egress, Pure, or No CTS) on a
specific interface, use the show platform cts reflector command.
Syntax Description interface type slot/port Specifies the interface type, slot and port for which to display status.
Command Modes
Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(50) SY
Related Commands Command
platform cts
Cisco TrustSec Configuration Guide
7-102
show platformcts reflector interface type slot/port
Modification
This command was introduced on the Catalyst 6500 Series Switches.
Description
Enables the TrustSec egress or ingress reflector.
Chapter 7 Cisco TrustSec Command Summary
OL-22192-01