Cisco TrustSec Configuration Manual page 136

clear cts policy
clear cts policy
To delete the peer authorization policy of a TrustSec peer, use the the clear cts policy command in
privileged EXEC mode.
Syntax Description peer peer_id
sgt sgt
Defaults
None
Command Modes Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Usage Guidelines
ExamplesTo clear The following example clears the peer authorization policy of the TrustSec peer with the peer ID atlas2:
the peer
Router# clear cts policy peer atlas2
authorization
Delete all peer policies? [confirm] y
policy of all
Router#
TrustSec peers, use
the clear cts policy
peer command
without specifying
a peer ID. To clear
the Security Group
tag of the TrustSec
peer, use theclear
cts policy sgt
command. Use the
show cts policy
peer command to
verify.
Cisco TrustSec Configuration Guide
7-50
clear cts policy {peer [peer_id] | sgt [sgt]}
Specifies the peer ID of the TrustSec peer device.
Specifies the Security Group Tag (SGT) of the TrustSec peer device in
hexadecimal.
Modification
This command was introduced on the Catalyst 6500 series switches.
Chapter 7 Cisco TrustSec Command Summary
OL-22192-01