Cisco TrustSec Configuration Manual page 186

show cts keystore
show cts keystore
To display the contents of the software or hardware encryption keystore, use the show cts keystore
command in EXEC or privileged EXEC mode.
Syntax Description This command has no commands or keywords.
Defaults
None
Command Modes
EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Usage Guidelines
This command shows all the records stored in the keystore. The stored secrets are not revealed.
Examples The following example displays the contents of a Catalyst 6500 software emulated keystore:
Router# show cts keystore
No hardware keystore present, using software emulation.
Keystore contains the following records (S=Simple Secret, P=PAC, R=RSA):
Index
-----
The following example displays the contents of a Catalyst 6500 hardware keystore:
Router# show cts keystore
CTS keystore firmware version 2.0.
Keystore contains the following records (S=Simple Secret, P=PAC, R=RSA):
Index
-----
Hardware Keystore error counters:
Cisco TrustSec Configuration Guide
7-100
show cts keystore
Modification
This command was introduced on the Catalyst 6500 series switches as
show cts keystore.
Type Name
---- ----
0 P 05181D8147015544BC20F0119BE8717E
1 S CTS-password
Type Name
---- ----
0 S CTS-passwordFOX094901KW
1 P 74656D706F72617279
FW Panics = 0
FW Resets = 0
Chapter 7 Cisco TrustSec Command Summary
OL-22192-01