Cisco TrustSec Configuration Manual page 168

show cts interface
show cts interface
To display TrustSec configuration statistics, use the show cts interface command in EXEC or privileged
EXEC mode.
Syntax Description type slot/port
brief
summary
Defaults
None
Command Modes EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Usage Guidelines Use the show cts interface command without keywords to display verbose status for all CTS interfaces.
Examples The following example displays output without using a keyword (verbose status for all CTS interfaces):
Router# show cts interface
Global Dot1x feature is Enabled
Interface GigabitEthernet4/1:
Cisco TrustSec Configuration Guide
7-82
show cts interface [type slot/port] | [brief] | [summary]
Modification
This command was introduced on the Catalyst 6500 series switches.
CTS is enabled, mode:
IFC state:
Authentication Status:
Peer identity:
Peer is:
802.1X role:
Reauth period configured:
Reauth period per policy:
Reauth period applied to link:
Authorization Status:
Peer SGT:
Peer SGT assignment: Untrusted
SAP Status:
Configured pairwise ciphers:
gcm-encrypt
null
(Optional) Specifies an interface type and slot and port number. A
verbose status output for this interface is returned.
(Optional) Displays abbreviated status for all CTS interfaces.
(Optional) Displays a tabular summary of all CTS interfaces with 4 or
5 key status fields for each interface.
DOT1X
OPEN
SUCCEEDED
"r1"
CTS capable
Authenticator
0 (locally not configured)
3000 (server configured)
3000 (server configured)
SUCCEEDED
0
NOT APPLICABLE
Chapter 7 Cisco TrustSec Command Summary
OL-22192-01