Refreshing The Downloaded Sgacl Policies - Cisco TrustSec Configuration Manual

Chapter 5 Configuring SGACL Policies

Refreshing the Downloaded SGACL Policies

Detailed Steps for Catalyst 6500, Catalyst 3850, Catalyst 3650
Command
Step 1
cts refresh policy {peer [peer-id]
| sgt [sgt_number|
default|unknown]}
Switch3850# cts refresh policy
peer my_cisco_ise
OL-22192-02
Refreshing the Downloaded SGACL Policies
Purpose
Performs an immediate refresh of the SGACL policies from
the authentication server.
If a peer-id is specified, only the policies related to the
•
specified peer connection are refreshed. To refresh all
peer policies, press Enter without specifying an ID.
• If an SGT number is specified, only the policies related
to that SGT are refreshed. To refresh all security group
tag policies, press Enter without specifying an SGT
number. Select default to refresh the default policy.
Select unknown to refresh unknown policy.
Cisco TrustSec Switch Configuration Guide
5-7