Configuring Cisco Access Control Servers - Cisco MDS 9000 Series Configuration Manual

Configuring Security Features on an External AAA Server
Fri Jan 16 23:45:19 1981:update:/dev/pts/0_348527824:admin:updated TACACS+ parameters for
group:TacacsServer1
Fri Jan 16 23:45:19 1981:update:/dev/pts/0_348527824:admin:updated RADIUS parameters for
group:Group1
...
Fri Jan 16 23:53:51 1981:update:/dev/pts/0_348527824:admin:updated RADIUS parameters for
server:Server3
Fri Jan 16 23:54:00 1981:update:/dev/pts/0_348527824:admin:updated RADIUS parameters for
server:Server5
Fri Jan 16 23:54:22 1981:update:/dev/pts/0_348527824:admin:updated TACACS+ parameters for
server:ServerA
Fri Jan 16 23:54:25 1981:update:/dev/pts/0_348527824:admin:updated TACACS+ parameters for
server:ServerB
Fri Jan 16 23:55:03 1981:update:/dev/pts/0_348527824:admin:updated RADIUS parameters for
group:Group1
...
Sat Jan 17 00:01:41 1981:start:snmp_348537701_171.71.58.100:admin:
Sat Jan 17 00:01:41 1981:stop:snmp_348537701_171.71.58.100:admin:
Sat Jan 17 00:01:42 1981:start:snmp_348537702_171.71.58.100:admin:
Sat Jan 17 00:01:42 1981:stop:snmp_348537702_171.71.58.100:admin:
...
Clearing Accounting Logs
To clear out the contents of the current log, use the clear accounting log command.
switch# clear accounting log

Configuring Cisco Access Control Servers

The Cisco Access Control Server (ACS) uses TACACS+ and RADIUS protocols to provide AAA services
that ensure a secure environment.When using the AAA server, user management is normally done using Cisco
ACS.
Multiple Roles with SNMPv3 Attributes When Using RADIUS, on page
network-admin Role with SNMPv3 Attributes When Using TACACS+, on page
Multiple Roles with SNMPv3 Attributes When Using TACACS+, on page 97
configurations for network-admin roles and multiple roles using either RADIUS or TACACS+.
Figure 4: Configuring the network-admin Role When Using RADIUS, on page
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
Clearing Accounting Logs
94, Figure 5: Configuring
95, Figure 6: Configuring the
96, and Figure 7: Configuring
display ACS server user setup
93