Cisco TrustSec Configuration Manual page 185

Chapter 7 Cisco TrustSec Command Summary
Peer IP
Source IP
Set up
Conn status
Connection mode
Connection inst# : 1
TCP conn fd
TCP conn password: not set (using default SXP password)
Delete hold down timer is running
Duration since last state change: 0:00:00:16 (dd:hr:mm:sec)
----------------------------------------------
Peer IP
Source IP
Set up
Conn status
Connection inst# : 1
TCP conn fd
TCP conn password: not set (using default SXP password)
Duration since last state change: 0:00:05:49 (dd:hr:mm:sec)
Total num of SXP Connections = 2
The following example displays the current SourceIP-to-SGT mapping database learned through SXP:
router# show cts sxp sgt-map
IP-SGT Mappings as follows:
IPv4,SGT: <2.2.2.1 , 7>
source
Peer IP : 2.2.2.1;
Ins Num : 1;
IPv4,SGT: <2.2.2.1 , 7>
source
Peer IP : 3.3.3.1;
Ins Num : 1;
Status
IPv4,SGT: <3.3.3.1 , 7>
source
Peer IP : 2.2.2.1;
Ins Num : 1;
The following example displays the current SourceIP-to-SGT mapping database using the brief
keyword:
Router# show cts sxp sgt-map brief
IP-SGT Mappings as follows:
IPv4,SGT: <2.2.2.1 , 7>
IPv4,SGT: <3.3.3.1 , 7>
IPv4,SGT: <4.4.4.1 , 7>
IPv4,SGT: <43.13.21.41 , 7>
Related Commands Command
cts sxp
OL-22192-01
: 2.2.2.1
: 2.2.2.2
: Peer
: Delete_Hold_Down
: SXP Listener
: -1
: 3.3.3.1
: 3.3.3.2
: Peer
: On
: 2
: SXP;
: SXP;
: Active;
: SXP;
Description
Configures SXP on a network device.
Cisco TrustSec Configuration Guide
show cts sxp
7-99