Preparing The Microsoft Hyper-V Hosts (Optional); Configuring The Mtu With The Cisco Nexus 1000V - Cisco Nexus 1000V Installing Manual
For microsoft hyper-v
Hide thumbs
Also See for Nexus 1000V:
- Troubleshooting manual (280 pages) ,
- Configuration manual (96 pages) ,
- Deployment manual (49 pages)
Table of Contents
Advertisement
Installing the VSM Software
Install-Nexus1000V-VSMCertificate.ps1
This script is used to install the Cisco Nexus1000V VSM certificate on the SCVMM server. This
certificate is required to establish an HTTPS connection between the SCVMM Server and the VSM.
Below is a sample run :-
Cleanup-Nexus1000V-VSEM.ps1
This script is used to perform a cleanup of the Nexus1000V components available on the SCVMM
server.
This script will exit if it encounters any Nexus1000V objects being used.
Note
Preparing the Microsoft Hyper-V Hosts (Optional)
Before you add the hosts to the logical switch, you can prepare the Microsoft Hyper-V hosts. This step
is optional.
This section includes the following topics:
•
•
•
Configuring the MTU with the Cisco Nexus 1000V
In Microsoft Hyper-V, the VSM does not manage the Maximum Transmission Unit (MTU) setting of
VM NIC or physical adapters. All physical adapters added to the Cisco Nexus 1000V switch should have
the same MTU configured and the PNIC MTU should not be changed after it is added to the switch.
To configure the MTU, perform the following steps:
Cisco Nexus 1000V for Microsoft Hyper-V Installation Guide, Release 5.2(1)SM1(5.2)
1-22
--------------------------------------------------------------------------------------
1 : Port Classification ==> 'Veth-policy-new'
--------------------------------------------------------------------------------------
Populating VM Networks for Logical Switch 'Nexus-Logical-Switch'.
--------------------------------------------------------------------------------------
INFO : List of VMnetworks Created (1):
1 : 'VMNetworkB'
---------------------
Execution Complete!
---------------------
Transcript stopped, output file is C:\Program
Files\Cisco\Nexus1000V\Scripts\VMMConfig\Refresh-Nexus1000V-VSEM-logs\Ref
resh-Nexus1000V-VSEM-1-23-14_12-54.log
PS C:\Program Files\Cisco\Nexus1000V\Scripts\VMMConfig>
PS C:\Program Files\Cisco\Nexus1000V\Scripts\VMMConfig>
.\Install-Nexus1000V-VSMCertificate.ps1 -ip 10.105.234.211
True
The script returns "True" for a successful install.
Configuring the MTU with the Cisco Nexus 1000V, page 1-22
VMQ Processor Configuration with the Cisco Nexus 1000V, page 1-23
Changing the RSS Registry, page 1-23
Chapter 1
Installing the Cisco Nexus 1000V for Microsoft Hyper-V
OL-30997-01
Advertisement
Table of Contents
