Cisco TrustSec Configuration Manual page 183

Chapter 7 Cisco TrustSec Command Summary
show cts sxp
To display SXP connection or SourceIP-to-SGT mapping information, use the show cts sxp command
in EXEC or privileged EXEC mode.
Syntax Description connections
sgt-map
brief
vrf instance_name
Defaults None
Command Modes EXEC (>); Privileged EXEC (#)
Supported User Roles
Administrator
Command History Release
12.2(33) SXI
12.2 (50) SG7
12.2 (53) SE2
12.2 (53) SE2
Usage Guidelines
Use the cts sxp connections command to view the status of the network device SXP configuration. Use
the cts sxp sgt-map command to display the current SourceIP-to-SGT mapping database.
Examples
The following example displays the default SXP configuration on a Catalyst 6500 series switch:
Router# show cts sxp connections
SXP
Default Password : Not Set
Default Source IP: Not Set
Connection retry open period: 120 secs
Reconcile period: 120 secs
Retry open timer is not running
There are no SXP Connections.
OL-22192-01
show cts sxp {connections | sgt-map} [brief | vrf instance_name]
Displays CTS SXP connections information.
Displays the IP-SGT mappings received through SXP.
(Optional) Displays an abbreviation of the SXP information.
(Optional) Displays the SXP information for the specified VRF instance
name.
Modification
This command was introduced on the Catalyst 6500 series switches.
This command was introduced on the Catalyst 4000 series switches
This command was introduced on the Catalyst 3750(E) and 3560(E) series
switches.
This command was introduced on the Catalyst 3750(X) series switches.
: Disabled
Cisco TrustSec Configuration Guide
show cts sxp
7-97