Cisco TrustSec Configuration Manual page 181

Chapter 7 Cisco TrustSec Command Summary
Usage Guidelines Use this command to verify that SXP is correctly binding source IP addresses to the appropriate Security
Group Tags (SGTs). VRF reports are available only from Privileged EXEC mode.
Examples The following example displays the bindings of IP address and SGT source names:
Router# show cts role-based sgt-map all
Active IP-SGT Bindings Information
IP Address
============================================
1.1.1.1
10.252.10.1
10.252.10.10
10.252.100.1
172.26.208.31 7
IP-SGT Active Bindings Summary
============================================
Total number of LOCAL
Total number of INTERNAL bindings = 4
Total number of active
Related Commands Command
s
cts role-based
cts sxp
show cts sxp
OL-22192-01
SGT Source
7 INTERNAL
7 INTERNAL
3 LOCAL
7 INTERNAL
INTERNAL
bindings = 1
bindings = 5
Description
Manually maps a source IP address to a Security Group Tag (SGT).
Configures SXP on a network device.
Displays CTS SXP protocol information
show cts role-based sgt-map
Cisco TrustSec Configuration Guide
7-95