Table of Contents
Advertisement
Chapter 7
Cisco TrustSec Command Summary
server-list
sxp
Defaults
None
Command Modes
EXEC (>); Privileged EXEC (#)
Supported User Roles
Administrator
Command History
Release
12.2(33) SXI
12.2(50) SY
Examples
The following is an example of show cts entered without keywords:
Router# show cts
Global Dot1x feature: Enabled
CTS device identity: "dcas1"
CTS caching support: disabled
Number of CTS interfaces in DOT1X mode:
Number of CTS interfaces in LAYER3 TrustSec mode: 0
Number of CTS interfaces in corresponding IFC state
INIT
AUTHENTICATING
AUTHORIZING
SAP_NEGOTIATING state:
OPEN
HELD
DISCONNECTING
INVALID
CTS events statistics:
authentication success: 14
authentication reject : 19
authentication failure: 0
authentication logoff : 1
authentication no resp: 0
authorization success : 19
authorization failure : 3
sap success
sap failure
port auth failure
OL-22192-01
Displays the CTS server lists.
Displays CTS SXP protocol information.
Modification
This command was introduced on the Catalyst 6500 series switches.
The following keywords were added for Catalyst 6500 series switches:
state:
19
state:
0
state:
0
0
state:
5
state:
0
state:
0
state:
0
: 12
: 0
: 0
19,
MANUAL mode: 5
Cisco TrustSec Configuration Guide
show cts
7-75
Hide quick links:
Advertisement
Table of Contents
