Cisco TrustSec Configuration Manual page 173

Chapter 7 Cisco TrustSec Command Summary
show cts pacs
To display the Protected Access Credentials (PACs), use the show cts pacs command in EXEC or
privileged EXEC mode.
Syntax Description This command has no commands or keywords.
Defaults
None
Command Modes
EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Usage Guidelines Use this command to identify the NDAC authenticator and to verify NDAC completion.
Examples The following example displays the Protected Access Credential (PAC) received from a Cisco ACS with
the authenticator ID (A-ID–Info) of acs1 by the device named atlas:
Router# show cts pacs
AID: 1100E046659D4275B644BF946EFA49CD
PAC-Info:
PAC-Opaque: 000200B000030001000400101100E046659D4275B644BF946EFA49CD0006009400
0301008285A14CB259CA096487096D68D5F34D000000014C09A6AA00093A808ACA80B39EB656AF0B
CA91F3564DF540447A11F9ECDFA4AEC3A193769B80066832495B8C40F6B5B46B685A68411B7DF049
A32F2B03F89ECF948AC4BB85CF855CA186BEF8E2A8C69A7C0BE1BDF6EC27D826896A31821A7BA523
C8BD90072CB8A8D0334F004D4B627D33001B0519D41738F7EDDF3A
Refresh timer is set for 00:01:24
Related Commands Command
clear cts pac
cts sxp
OL-22192-01
show cts pacs
Modification
This command was introduced on the Catalyst 6500 series switches.
PAC-type = Cisco Trustsec
AID: 1100E046659D4275B644BF946EFA49CD
I-ID: atlas
A-ID-Info: acs1
Credential Lifetime: 13:59:27 PDT Jun 5 2010
Description
Clears a PAC or all PACs from the keystore.
Configures SXP on a network device.
Cisco TrustSec Configuration Guide
show cts pacs
7-87