Cisco TrustSec Configuration Manual page 129

Chapter 7 Cisco TrustSec Command Summary
clear cts cache
To clear TrustSec authorization and use the clear cts counter Privileged EXEC command.
Syntax Description
authorization-policies [ peer | sgt]
environment-data
filename file
interface-controller type slot/port
Defaults None
Command Modes
Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
12.2(50) SY
Examples
The following example deletes environment data from cache:
Router# clear cts cache environment-data
Router#
Note
Related Commands Command
cts cache
OL-22192-01
clear cts cache authorization-policies [peer | sgt]
clear cts cache environment-data
clear cts cache filename file
clear cts cache interface-controller [type slot/port]
Modification
This command was introduced on the Catalyst 6500 series switches.
The interface-controller keyword was introduced on the Catalyst 6500
series switches.
Clearing peer authorization and SGT policies are relevant only to TrustSec devices capable of
enforcing SGACLs.
Description
Enables caching of TrustSec authorization and environment data information
to DRAM and NVRAM
Clears all cached SGT and peer authorization policies.
Clears environment data cache file.
Specifies filename of cache file to clear.
Specifies which interface controller cache to clear.
Cisco TrustSec Configuration Guide
clear cts cache
7-43