Cisco TrustSec Configuration Manual page 166

show cts environment-data
show cts environment-data
To display the TrustSec environment data, use the show cts environment-data command in EXEC or
privileged EXEC mode.
Syntax Description This command has no commands or keywords.
Defaults
None
Command Modes
EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Examples The following example displays the environment data of a Cisco Catalyst 6500 series switch.
Router# show cts environment-data
CTS Environment Data
====================
Current state = COMPLETE
Last status = Successful
Local Device SGT:
SGT tag = 11-ea7f3097b64bc9f8
Server List Info:
Preferred list, 0 server(s):
Installed list: SL1-15A25AC3633E7F074FF7E0B45861DF15, 1 server(s):
*Server: 43.1.1.3, port 1812, A-ID 05181D8147015544BC20F0119BE8717E
Multicast Group Addresses:
Multicast Group SGT Table:
Name = mcg_table_2-4ff532e525a3efe4
Multicast SGT:
Transport type = CTS_TRANSPORT_IP_UDP
Environment Data Lifetime = 2000 secs
Last update time = 21:43:28 UTC Mon Aug 27 2007
Data loaded from cache = FALSE
Refresh timer is running
State Machine is running
Cisco TrustSec Configuration Guide
7-80
show cts environment-data
Modification
This command was introduced on the Catalyst 6500 series switches.
Status = ALIVE
auto-test = TRUE, idle-time = 60 mins, deadtime = 20 secs
Chapter 7 Cisco TrustSec Command Summary
OL-22192-01