Realpresence Collaboration Server (Rmx) 4000 Rear Panel Leds - Polycom RealPresence RMX 4000 Hardware Manual

RealPresence Collaboration Server (RMX) 4000 Components and Components Replacement

RealPresence Collaboration Server (RMX) 4000 Rear Panel LEDs

This section introduces LEDs on the RealPresence Collaboration Server (RMX) 4000 rear panel.
RTM IP 4000
The following LEDs appear on the RTM IP 4000 card.
RTM IP 4000 LEDs
Component LED Name
LAN 1 LNK
1Gb
LAN 2-5 LNK
ACT
LAN 6 LNK
10/100Mb ShMG
100
INT LINK
(No.) 1-6
T/R
STANDBY
ShMG (Shelf ERR
Manager)
ACT
RDY
HS
Polycom, Inc.
LED Color Description
Green ON with an active network connection, flickers with Packet
activity.
Green ON with a 1Gb online connection, flickers with Packet
activity.
Amber ON with a 100Mb online connection.
Green ON with network connection, flickers with Packet activity.
OFF-1Gb or no connection.
Amber ON - online connection, flickers with Packet activity.
OFF - No Link.
Green ON - Connection 100Mb.
OFF - Connection is not 100Mb or No Link.
Green ON with an active network connection, flickers with Packet
activity.
Amber ON with a 1Gb online connection, flickers with Packet
activity.
Green When the user in the RMX Manager/Client presses the
System Shut Down (red) button in the Hardware Monitor tool
bar, the system should enter a standby mode and the LED
turns ON. Only the media and control unit cards are in a
standby mode. Shelf Manager remains active.
Turn the system OFF/ON to exit the standby mode.
Red ON - Major error on RTMIP 4000 card.
Flashes - During system startup.
Amber ON - Packet flow to and from the MCU chassis.
Flashes - During system startup.
Green ON - RTM IP 4000 card has successfully completed startup.
Flashes - During system startup.
Blue Hot Swap not supported.
OFF - Normal.
Flashes for a second during initial power up.
58