Switch Scans And The Sensor And Switches Test - Xerox 2135DX - Phaser Color Laser Printer Service Manual

Switch scans and the sensor and switches test

Switch or sensor Switch scan test
Lower Fuser
Thermistor - 00F
not used
Humidity Sensor
Temperature
Sensor
not used
not used
Duplex In Sensor
Duplex Rear
Sensor
not used
Duplex Front
Sensor
Tray 2, Size 1
Switch - (Top)
Tray 2, Size 2
Switch
Tray 2, Size 3
Switch
Tray 2, Size 4
Switch - (Bottom)
Tray 2 No Paper
Sensor
Tray 2 Low Paper
Sensor
not used
not used
Right Door Tray 2
not used
Tray 2 Feed
Sensor
not used
66 Phaser 2135 Color Printer
Switch Scan 09
3=
Switch Scan 09
4=
Switch Scan 10
1=
Switch Scan 10
2=
Switch Scan 10
3=
Switch Scan 10
4=
Switch Scan 11
1=
Switch Scan 11
2=
Switch Scan 11
3=
Switch Scan 11
4=
Switch Scan 12
1=
Switch Scan 12
2=
Switch Scan 12
3=
Switch Scan 12
4=
Switch Scan 13
1=
Switch Scan 13
2=
Switch Scan 13
3=
Switch Scan 13
4=
Switch Scan 14
1=
Switch Scan 14
2=
Switch Scan 14
3=
Switch Scan 14
4=
Test result Details
Encoded fuser Temperature is encoded as a
roller temperature hexidecimal value. The default is
between 001 and0 D4.
not used
Encoded Ambient environmental humidity is
environmental encoded as a hexidecimal value. The
humidity default is between 158 and 2A7.
Encoded Ambient environmental temperature is
environmental encoded as a hexidecimal value. The
temperature default is between 0E7 and 27C.
not used
not used
L - Deactuated Pull out the duplex unit. Lift its cover.
H - Paper present Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.
L - Deactuated Pull out the duplex unit. Lift its cover.
H - Paper present Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.
not used
L - Deactuated Pull out the duplex unit. Lift its cover.
H - Paper present Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.
L - Actuated Remove the tray and actuate the sensor
H - Deactuated flags at the rear of the tray cavity
L - Actuated
H - Deactuated
L - Actuated
H - Deactuated
L - Actuated
H - Deactuated
L - Paper present Pull tray out to test sensor
H - No paper
L - Paper level OK Pull tray out to test sensor
H - Low paper
not used
not used
L - Opened Open door to test sensor
H - Closed
not used
L - Actuated Open the Tray 2 right-side door and
H - Deactuated toggle sensor flag below the feed rollers
not used