Confirming Transmissions; Automatic Redialing; Sending A Fax From The Driver (Direct Fax) - Dell 3115cn Color Laser Printer User Manual

NOTE: Press Cancel and

Confirming Transmissions

When the last page of your document has been sent successfully, the multifunction printer beeps and returns
to the standby mode.
If something goes wrong while sending your fax, an error message appears on the display. For a listing of
error messages and their meanings, see "Understanding Multifunction Printer Messages ".
If you receive an error message, press Cancel to clear the message and try to send the document again.
You can set your multifunction printer to print a confirmation report automatically after each fax
transmission. For further details, see "Printing a Report ".

Automatic Redialing

If the number you have dialed is busy or there is no answer when you send a fax, the multifunction printer
will automatically redial the number every minute based on the number set in the redial settings.
To change the time interval between redials and the number of redial attempts, see "Available Fax Settings
Options ".

Sending a Fax from the driver (Direct Fax)

You can send a fax directly from your computer by using the driver.
NOTE: Only black and white faxes can be sent using Direct Fax.
Example
Procedure
NOTE: The names of the dialog boxes and the buttons may be different from those given in the
following procedure depending on the application you are using.
1.
to cancel the fax job at any time while sending the fax.