Dell 3115cn Color Laser Printer User Manual page 146

d.
e. Select Connect Anyway in the warning dialog box indicating you are entering an unsecured
area.
f. Click Close in the dialog box after confirming the connection is a success.
6. On the Enter Wireless Network Settings screen, set each wireless setting item, and then click Next
.
7. When you select the Fixed IP option button for IP address assignment , click Change... and enter
the IP address and subnet mask on the screen.
NOTE: When you enter a fixed IP address, avoid the "169.254.xxx.xxx " address used by AutoIP.
8. Set each item on the Enter Printer Settings screen, and then click Next .
9. On the Printer Software screen, specify the software that you want to install and installation path,
and then click Next . At this point, the wireless setting specified on the Enter Wireless Network
Settings screen is sent to the multifunction printer.
10. On the Wireless configuration is now complete screen, create the wireless setting sent to the
multifunction printer on your computer following the steps below, and then click Next .
For Windows XP and Windows Server 2003:
a. Select Network Connections from Control Panel .
b. Right-click Wireless Network Connection and select Properties .
c. Select the Wireless Network tab.
d. Ensure that the check box for Use Windows to configure my wireless network settings is
checked.
e. Click Advanced .
f. Do either of the following:
When wireless ad-hoc mode is set to the multifunction printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the multifunction printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
g. Click Add to display Wireless network properties.
h. Enter the setting that you send to the multifunction printer and click OK .
i. Click Move up to move the setting to the top of the list.
j.