Using Txt2Ps2 (Linux/Solaris/Hp-Ux); Using Sunras2Ps2/Tiff2Ps2/Xwd2Ps2 (Sunras2Ps2 Apply To Solaris Only) - Dell 3115cn Color Laser Printer User Manual

automatic line feed. If this happens, specify l or w option.
In text printing, the number of columns specified by the w option does not reflect the number of
characters actually printed. The actual number of single-byte characters to be printed is derived by
deducting the output column position (out columns) specified by the o option from the number of
columns specified by the w option.
If the same option is specified, or if s, S are both specified, the one specified later will prevail.
In printing images, If the print position option (l) specifies an area beyond the printable area of the
multifunction printer, data beyond the printable area will not be printed. (Using Solaris, it's impossible
to output images by lp command.)

Using txt2ps2 (Linux/Solaris/HP-UX)

When the same option is specified twice, the later setting will prevail. As TXT2PS2OPTION is analyzed
before the option of the command line, it is possible to temporarily modify the options already set in
TXT2PS2OPTION by inputting at the command line
The default output of txt2ps2 cannot output the comment description (%%page:m n)of the page
number. This is because the converted PostScript language program controls line feed and form feed.
Thus, when the output of txt2ps2 is to be taken as the output of another application (psrev of
TRANSCRIPT, etc.), add the page number description by inserting the line command (-Ilines).
If a BS code is found at the beginning of a line, the print position of the next character will be on the
left of the beginning of a line.
When there are multiple tab codes in one line, the positions of tab may be off due to automatic line
feed. If this happens, specify the -l or -w option.
The number of columns specified by the -w option does not reflect the number of characters actually
printed. The actual number of single-byte characters to be printed is derived by deducting the output
column position (out columns) specified by the o option from the number of columns specified by the w
option.
The -mg option cannot be specified when -w, -l, -o, and -L option are specified.
The start positions of margins of the margin command (-mg=u:b:r:l) are not set against the edge of
paper. The margins are set against the printable area for paper allowed by the multifunction printer.
Use the -ps option only when a PostScript file that contains no %! at the beginning of the file is used as
the PostScript file. If a normal text file is input, it will not function correctly.
To use the same options as those of the dellpsif filter by TXT2PS2OPTION, set the user's home directory
in the environmental variable HOME. If the environmental variable HOME is not set up, the same options
as those of the dellpsif filter cannot be used. (Linux)

Using sunras2ps2/tiff2ps2/xwd2ps2 (sunras2ps2 apply to Solaris only)

If the same option is specified, or if s, S are both specified, the one specified later will prevail.
If the size option (s, S) is not specified, scaling will be executed taking one pixel of the image data as
one pixel of the multifunction printer.