For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
2 Press the
3 Adjust the document resolution to suit your fax needs. For more
information, see "Resolution" on page 298.
If you need to change the contrast, see "Lighter/Darker" on page 299.
4 Press the
button.
5 Press the
button.
6 Enter the fax number of the remote fax machine using the numeric
keypad.
•
If the document is loaded on the ADF, press the
•
If the document is not loaded on the ADF, press the
button, press the
then press the
NOTE:
Press the
any time while sending the fax.
Confirming Transmissions
When the last page of your document has been sent successfully, the printer
beeps and returns to the standby mode.
If something goes wrong while sending your fax, an error message appears on
the display.
If you receive an error message, press the
message and try to send the document again.
You can set your printer to print a confirmation report automatically after
each fax transmission. For more information, see "Printing a Report" on
page 319.
(Fax) button.
button until OnHook is highlighted, and then press the
button until On is highlighted, and then press the
button until the desired setting appears, and
button.
(Cancel) button and the
(Start) button.
button to cancel the fax job at
(Cancel) button to clear the
Faxing
(Start)
301