Interval Timer; Usb Settings; Fax Settings - Dell 3115cn Color Laser Printer User Manual

Adobe Protocol
Purpose:
To specify PostScript communication protocol for each interface. You can configure Adobe Protocol settings
for the wireless network. The change becomes effective after the multifunction printer is turned off and then
on again.
Values:
Used when auto-detecting the PostScript communication protocol.
Auto
Used when the communication protocol is in ASCII interface.
Standard
Used when the communication protocol is in binary format.
BCP
Used when the communication protocol supports both ASCII and binary data to switch between
TBCP*
them according to the specified control code.
Used when no special processing is required.
Binary

USB Settings

Use the USB Settings menu to change printer settings affecting a USB port.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Fax Settings

Use the Fax Settings menu to configure the basic fax settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Interval Timer

Purpose:
To specify the interval time (3-255 seconds) of the resend attempts.
Number of Redial