Labels - Dell 3115cn Color Laser Printer User Manual

For best performance, use envelopes made from 75 g/m
2
g/m (28 lb bond) weight for the envelope feeder as long as the cotton content is 25% or less.
Envelopes with 100% cotton content must not exceed 90 g/m
Use only new, undamaged envelopes.
For best performance, do not use envelopes that:
Have excessive curl or twist
Are stuck together or damaged in any way
Contain windows, holes, perforations, cutouts, embossing
Use metal clasps, string ties, or metal folding bars
Have an interlocking design
Have postage stamps attached
Have any exposed adhesive when the flap is in the sealed or closed position
Have nicked edges or bent corners
Have rough, cockle, or laid finishes
Use envelopes that can withstand temperatures of 205°C (401°F) without sealing, excessive curling,
wrinkling, or releasing hazardous emissions. If you have any doubts about the envelopes you are
considering, check with the envelope supplier.
Adjust the guide to fit the width of the envelopes.
To load envelope in the multipurpose feeder, insert the envelopes with the flaps closed and the short-
edge of the envelopes facing into the multifunction printer. The print side must be facing down.
See "Loading the Multipurpose
Use one envelope size during a print job.
Ensure the humidity is low because high humidity (more than 60%) and the high printing temperatures
may seal the envelopes.

Labels

Your multifunction printer can print on many labels designed for use with laser printers. Label adhesives,
face sheet (printable stock), and topcoats must be able to withstand temperatures of 205°C (401°F) and
pressure of 25 pounds per square inch (psi). Before buying large quantities of any print media, Dell
recommends trying a sample first.
When printing on labels:
Set the paper type to Label in the Tray Settings. Set the paper type to Label from the printer
driver.
Feeder" for instructions on loading an envelope.
2
(20 lb bond) paper. You can use up to 105
2
(24 lb bond) weight.