Advanced Fax Settings - Dell 3115cn Color Laser Printer User Manual

Dell 3115cn user's guide
Hide thumbs Also See for 3115cn Color Laser Printer:
Table of Contents

Advertisement

Select Trans. Always to always forward the incoming faxes.
Select Not Trans. not to forward incoming faxes. You can set the fax number to which
faxes are forwarded. Then, you can enter the start time and/or the end time. The Print Local
Copy option allows you to set the multifunction printer to print the fax, if fax forwarding is
completed with no error.
Fwd.
You can set the number of the multifunction printer to always forward all of the incoming
Settings
faxes to the specified destination.
Num
Fwd. Set
Prints all of the ongoing faxes when you can set the multifunction printer to always forward
Print
the faxes to the specified destination.
Prefix Dial
You can select whether or not to add the prefix number when you send a fax.
Prefix Dial
You can set a prefix dial number up to five digits. This number dials before any auto dial
Num
number is started. It is useful for accessing the PABX exchange.
Discard
When receiving a document as long as or longer than the paper installed in your
Size
multifunction printer, you can set the multifunction printer to discard any excess at the
bottom of the page. If the received page is outside the margin you set, it will print on two
sheets of paper at the actual size. When the document is within the margin and the Auto
Reduction feature is turned on, the multifunction printer reduces the document to fit it onto
the appropriate sized paper and discard does not occur. If the Auto Reduction feature is
turned off or fails, the data within the margin will be discarded.
Color Fax
Set whether the multifunction printer sends and receives color faxes.
Extel Hook
You can set the threshold value for the OnHook mode.
Thresh
Country
You can select the country where the multifunction printer is used.
Fwd. Error
Prints the document failed to transfer when Forward Set Print is set to Off .
Print
NOTE:
Prefix Dial only supports the environment where you send a fax to send a fax to the external
line number. To use Prefix Dial, you must do the following from the operator panel.
1.
Use
and
to select SETUP
press
.
2.
Use
and
to select SETUP
press
.
3.
Use
and
to select SETUP
maximum of five-digit prefix number from 0-9, *, and #.

Advanced Fax Settings

NOTE:
The advanced fax settings are only meant for advanced users. Incorrect settings on the Dell
3115cn may damage the device.
Admin Menu
Fax Settings
Admin Menu
Fax Settings
Admin Menu
Fax Settings
Line Type . Select PBX , and then
Prefix Dial . Select On , and then
Prefix Dial Num . Enter a

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents