Using The Dell Printer Configuration Web Tool; To Select A New Value As A Setting - Dell 3115cn Color Laser Printer User Manual

This asterisk indicates the factory default menu setting. These settings are the original system settings.
NOTE: Factory defaults may vary for different countries.
When you select a new setting from the operator panel, an asterisk appears next to the setting to identify it
as the current user default menu setting.
These settings are active until new ones are selected or the factory defaults are restored.

To select a new value as a setting:

1. Press until >SETUP appears, and then press
2. Press or until the desired menu appears, and then press
3. Press , , , or
If the selection is a menu, the menu is opened and the first system setting in the menu appears.
If the selection is a menu item, the default menu setting for the menu item appears. (The current
user default menu setting has an asterisk (*) beside it.)
Each menu item has a list of values for the menu item. A value can be:
A phrase or word to describe a setting
A numerical value that can be changed
An On or Off setting
4. Press or to scroll until the desired value appears.
5. Press Back to return to the previous menu.
To continue setting other items, select the desired menu. To quit setting new values, press Cancel.
Driver settings may override changes previously made and may require you to change the operator panel
defaults.
NOTE: To adjust the density to make the scanned copy lighter or darker than the original.
Using the Dell Printer Configuration Web Tool to Change
System Settings
If your multifunction printer is connected to the network, you can change the operator panel settings from
until the desired menu or menu item appears, and then press
.
.
.