Specifying The Password; Txt2Ps2 (Linux/Solaris/Hp-Ux); To Specify The Password For Authentication Printing; Format - Dell 3115cn Color Laser Printer User Manual

% setenv JOWN3115U ""
NOTE: Up to 32 characters are acceptable for the user name. When a user name exceeds allowable
character length, the extra characters are ignored.
NOTE: If you specify the filter option when authentication printing is already specified, the filter option
has the higher priority over authentication printing.

Specifying the Password

To Specify the Password for Authentication Printing:

If you need to specify the password in authentication printing, you can specify the password in the
environment variable as follows:
% setenv JOWN3115P "password"
If you do not specify the password inexplicitly, type as follows:
% setenv JOWN3115P ""
NOTE: Acceptable password length is between 4 and 12 characters. When an unacceptable character
is specified for password, or when a specified password is not within the range of the allowable
character length, the extra characters are ignored.
NOTE: If you specify the filter option when authentication printing is already specified, the filter option
has the higher priority over authentication printing.
NOTE: If you only specify the password without specifying the user name in the environment variable,
the login name is assumed as the user name.
NOTICE: If you enter the password in the login file for automatically allocating the environment
variable when you log in, you are recommended to specify the appropriate access privilege that
prevents unauthorized users from reading the login file.

txt2ps2 (Linux/Solaris/HP-UX)

Format

/usr/local/dellbin3115/txt2ps2 [-d] [-D] [-Itray-input] [-t] [-2] [-r] [-F] [-llines] [-
wcolumns] [-ooutcolumns] [-Loutlines] [-en] [-ssize] [-E] [-ffont] [-Nc=copies] [-cl] [-ps]
[-mg=up:bottom:right:left] [-Hd=position:format:page] [-Hffont] [-MSI] [-M=type] [-Mfo=mode]
[-Pon] [-St=mode] [-Sp] [-Sb] [-Cm=mode] [-Pr=mode] [-Cc=mode] [-Gc=mode] [-Sc=mode] [-
Gg=mode] [-Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middle:magenta-high:yellow-
low;yellow-middle:yellow high:black-low:black-middle:black-high] [-
Hld=PrintType:UserID:Password:DocumentName] [-Jown=jobownername:password] [filename...]
Function
Reads text, converts it to the PostScript language program, and writes to standard output. If the filename is