Dell 3115cn Color Laser Printer User Manual page 286

NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy.
To select from the predefined copy sizes:
1. Load the document to be copied on the document feeder glass, and close the cover.
2. Press until >COPY appears, and then press
3. Press until Reduce/Enlarge appears.
4. Press to select the desired settings, and then press
100%*
129% (in inch), 129% (in mm) 50%
154% (in inch), 141% (in mm) 70% (in inch), 64% (in mm)
200%
NOTE: You can set the value in a percent for Custom.
5. Press Start to begin copying.
Original Type
The Original Type setting is used to improve the image quality by selecting the document type for the
current copy job.
To select the image quality:
1. Load the document to be copied on the document feeder glass, and close the cover.
2. Press until >COPY appears, and then press
3. Press until Original Type appears.
4. Press to select the desired settings, and then press
Text&Photo* Uses for documents with both text and photo/gray tones.
Photo Uses for documents with photo or gray tones.
Best Uses for documents with fine text of high resolution.
Text Uses for documents with text.
5.
.
.
Custom 100% (25-400%)
78% (in inch), 81% (in mm)
.
.