Printing From The Application Program - Dell 3115cn Color Laser Printer User Manual

f.
g. Confirm the settings in Edit configuration, and then click OK.
For network connections:
a. Select Other (not detected) as Available are in Printers to configure, and then click
Configure....
b. Select the Print via LPD-Style Network Server as Printer Type, and then click Next.
c. Type the printer's IP address in Host name of the printer server. And type the name of the
printer queue in Name of the remote queue, and then click Next.
d. Set the name of the printer queue in Queue name, and type the queue name for printing in
Name for printing.
The Description of Printer and Location of Printer do not have to be specified.
e. Select the Do Local Filtering check box, and then click Next.
f. Select DELL as Select manufacturer. Select Dell MFP Laser 3115cn as Select Model, and
then click Next.
g. Confirm the settings in Edit configuration, and then click OK.
5. Click Finish.

Printing From the Application Program

When you have finished setting up the queue you can print jobs from the application program. Start the print
job from the application program, and then specify the queue in the print dialog box.
However, sometimes you can only print from the default queue depending on the application program (for
example Mozilla). In these cases, before you start printing, set queue you want to print to as the default
queue. For information on specifying the default queue, see
Setting the Default Queue
1. To activate the Printer setup: Autodetected printers, do the following:
a. Click Start Applications System YaST.
b. Type the administrator's password.
YaST Control Center is activated.
c. Select Hardware from Printer.
2. Printer setup: Autodetected printers is activated.
3. Click Change....
4.
"Setting the Default Queue".