Sending A Fax Manually; Confirming Transmissions - Dell 1600n Multifunction Mono Laser Printer User Manual

3.
You can use one, two or three-digit speed or group dial numbers. For details, see
on page 128.
4. Press <Send Fax>.
5. When the document is loaded from the scanner glass, the display shows "Another Page?" on the top
line after the document is scanned into the memory. If you have additional pages, remove the scanned
page and load the next page from the glass and select "1:Yes". Repeat as necessary.
After all of the pages are scanned, select "2:No" when the display shows "Another Page?"
6. The number is dialed and then the multi-function printer begins sending the fax when the remote fax
machine is ready.
NOTE: Press <Cancel> to cancel the fax job at any time while sending the fax.

Sending a Fax Manually

1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the scanner glass.
For details about loading a document, see
2. Adjust the document resolution to suit your fax needs (see
If you need to change the contrast, see
3. Press <On Hook Dial>. You hear a dial tone.
4. Enter the remote fax machine's fax number using the number keypad.
5. When you hear a high-pitched fax tones from the remote fax machine, press
<Send Fax>.
NOTE: Press <Cancel> to cancel the fax job at any time while sending the fax.

Confirming Transmissions

When the last page of your document has been sent successfully, the multi-function printer beeps and
returns to Standby mode.
If something goes wrong while sending your fax, an error message appears on the display. For a listing of
error messages and their meanings, see
page 120.
page 118.
page 171.
"Automatic Dialing"
page 122).