NOTE:
Ensure that you enter an IP address in the Server Address box correctly.
Start to send the scanned file on the Network
1.
From the operator panel, press
2.
Press
until Scan to Network appears.
3.
Press
or
to select the option you selected in "Setting Up the Address Book ", and then press
Server: Stores the scanned image on the server by using the FTP protocol.
Computer: Stores the scanned image on the computer by using the SMB protocol.
Search Address: Select the server address registered in Address Book.
NOTE:
Users need to be registered before you can select Server/Computer on the operator panel.
4.
Press Start to send the scanned files.
until >SCAN appears, and then press
.
.