Option - Dell 3115cn Color Laser Printer User Manual

not specified, the standard input will be taken as the command input.
By typing character strings in the environmental variable TXT2PS2OPTION, the input of option at the
command line can be omitted.
At the environmental variable TXT2PS2OPTION and the command line, if no option is specified, the
multifunction printer will output in 10-point font size in the portrait orientation.
At the environmental variable TXT2PS2OPTION and the command line, if the same option is specified, the one
specified at the command line will prevail.
txt2ps2 outputs the PostScript language program that adjusts the line/column according to the paper size.
For this reason, the user need not be aware of the paper size. If there is an option to specify the
line/column, automatic line feed according to the paper size will not be executed. Printing will be output
according to the line/column specified.
txt2ps2 interprets the following control codes. Other control codes/undefined codes will be converted to octal
numbers and output as-is.
LF
Line feed
FF
Form feed (modifiable by option)
TAB
8-column tab stop (modifiable by option)
BS
Backspace 1 character

Option

-d
Enables the short-edge binding feature. When it is specified, the printing direction or position will be
adjusted and both sides of the paper printed so that the shorter edge of the pages can be bound. This
option is available only when optional duplexer is installed on the multifunction printer.
-D
Enables the long-edge binding feature. When it is specified, the printing direction or position will be
adjusted and both sides of the paper printed so that the longer edge of the pages can be bound. This
option is available only when optional duplexer is installed on the multifunction printer.