Dell 3115cn Color Laser Printer User Manual page 236

3
* This mode is available only when firmware version 200706291103 or later and network (MPC) firmware
version 16.03 or later are installed. Since you cannot set IPsec in Windows Vista in this mode, use the Dell
Printer Configuration Web Tool. The Get Information from Printer function on the Options tab of
the printer driver is not available when using this mode.
Protocol
Purpose:
To enable or disable each item. The change becomes effective after the multifunction printer is turned off
and then on again.
Values:
LPD Enable*
Disable
Port9100 Enable*
Disable
IPP Enable*
Disable
SMB TCP/IP Enable*
Disable
SMB NetBEUI Enable*
Disable
FTP Enable*
Disable
NetWare IP Enable*
Disable
Enables the LPD port.
Disables the LPD port.
Enables the Port9100 port.
Disables the Port9100 port.
Enables the IPP port.
Disables the IPP port.
Uses TCP/IP for SMB.
Does not use TCP/IP for SMB.
Uses NetBEUI for SMB.
Does not use Net BEUI for SMB.
Enables the FTP port.
Disables the FTP port.
Enables the IP.
Disables the IP.