Netware Setup Page - Dell 3115cn Color Laser Printer User Manual

Remote peers IPv6
address
Non IPsec communication
policy
IP Filter Access List
4
(IPv4) *
1
* The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
2
* An optional wireless printer adapter is required to display the item.
3
* An optional multi-protocol card is required to display the items.
4
* This item is only available for LPD or Port9100.

NetWare Setup Page

Purpose:
To verify the current settings of IPX/SPX (Internetwork Packet Exchange/Sequenced Packet Exchange) and
Netware. In this page, you can only verify the settings of items. If you want to change the settings, go to the
pages in the Print Server Settings tab.
Values:
IPX/SPX Frame Type
Settings
Current Frame
Type
Network
Address
NetWare Port Status
Device Name
Active Mode
Tree Name
Context Name
File Server
Name
Polling Interval
NCP Packet
Burst
Status
Information
Displays the IP address to connect to.
Displays the status of the Non IPsec communication
policy feature.
Displays the list of IP addresses that are permitted or
denied access to the multifunction printer.
Displays the active frame type.
Displays the current frame type.
Displays the IPX/SPX network address.
Displays the port status. When NetWare is implemented, the status
of IPX/SPX and TCP/IP is also displayed.
Displays the printer name.
Displays the current mode for Active Mode.
Displays the tree name.
Displays the context name of the Print Server Object.
Displays the file server name.
Displays the time interval.
Displays the status, and whether to use NCP (NetWare Core Protocol)
packet burst.
Displays messages according to the conditions of the multifunction
printer.