Dell 3115cn Color Laser Printer User Manual page 238

Automatically sets the frame type.
Auto*
Uses the Ethernet II frame type.
Ethernet II
Uses the IEEE802.3 frame type.
Ethernet 802.3
Uses the IEEE802.2 frame type.
Ethernet 802.2
Use the SNAP frame type.
Ethernet SNAP
IP Filter (IPv4)
Purpose:
To specify that data received from certain IP addresses through the wireless network is blocked. You can set
up to five IP addresses. The change becomes effective after the multifunction printer is turned off and then
on again.
Values:
1
IP Filter* No. n/Address (n is 1-5.)
No. n/Mask (n is 1-5.)
No. n/Mode (n is 1-5.) Off*
1
* This item is only available for LPD or Port9100.
Initialize NVM
Purpose:
To initialize wireless network data stored in NVRAM.
Adobe Protocol
Sets the IP address for Filter n.
Sets the mask for Filter n.
Disable the IP Filter feature for Filter n.
Accepts an access from specified IP address.
Accept
Rejects an access from specified IP address.
Reject