Dell 3115cn Color Laser Printer User Manual page 449

d.
e. Select Access point (Infrastructure) networks only and close the Advanced dialog box
(Applicable to the multifunction printer with the wireless infrastructure mode).
f. Select the setting that you send to the multifunction printer in the list in the Preferred Network
group
g. Click Move up to move the setting to the top of the list.
h. Click OK to close the Property dialog box.
NOTE: When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
a. Open Control Panel.
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select the setting you send to the multifunction from the network items listed in Connect to a
network.
f. Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area.
g. Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008:
a. Open Control Panel.
b. Select Network and Sharing Center.
c. Select Connect to a network.
d. Select the setting you send to the printer from the network items listed in Connect to a
network.
e. Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area.
f. Click Close in the dialog box after confirming the connection is a success.
Access point (Infrastructure, Fixed IP network)
1. Ensure that the addresses of your computer and access point is in the same IP range. Match the subnet
mask and gateway addresses of your computer to the access point settings.
2.