New Wireless Network Environment - Dell 3115cn Color Laser Printer User Manual

Case 3. Construct new wireless network environment for both computer
and multifunction printer (When wireless setting needs to be set to your
computer)
1. Insert the Drivers and Utilities CD into your computer.
2. The Drivers and Utilities CD should launch the installation software automatically.
If the CD does not automatically launch, click Start
letter of your CD), and then click OK .
NOTE: For Windows Vista, click Continue when the User Account Control dialog box appears.
3. Select the Network Installation option button, and then click Next .
4. Select the Configure Wireless Printer using a USB connection (Recommended) option button,
and then click Next .
5. Reset the wireless setting of the multifunction printer following the steps on the Reset Wireless
Setting screen.
6. In the list on the Select Printer screen, check the check box of the target printer that you are making
wireless setting for, and then click Next .
NOTE: When you enter a fixed IP address, avoid the "169.254.xxx.xxx " address used by AutoIP.
7. On the Enter Wireless Network Settings screen, set each wireless setting item, and then click Next
. When you select the Fixed IP option button for IP Address assignment , click Change... and enter
the IP address and subnet mask on the screen.
8.
9.
Run , type D:\Setup.exe (where D is the drive