Dellpsif (Linux) - Dell 3115cn Color Laser Printer User Manual

When a job owner name exceeds allowable character length, the extra characters are
ignored.
When an unacceptable character is specified for job owner name, "Unknown User" is used
as job owner name.
NOTE: Characters acceptable for job owner name are alphanumeric characters and symbols, except
for space and colon.
NOTE: Up to 32 characters are acceptable for job owner name.
When an unacceptable character is specified for password, or when a specified password is
not within the range of the allowable character length, the authentication password is
treated as not specified.
NOTE: Only numbers are acceptable for password.
NOTE: Acceptable password length is between 4 and 12 characters.
Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if
authentication setting is made with the environmental variable, it is used as setting information.
Example
To convert the XWD image into the PostScript language program and output it to a file, type as follows:
% xwd2ps2 file.xwd > file.ps
To output the XWD image to a multifunction printer, type as follows:
% xwd2ps2 file.xwd | lpr (for Linux)
% xwd2ps2 file.xwd | lp (for Solaris/HP-UX)
Important
When -s and -S are specified at the same time or when the same option is specified twice, the later
setting will prevail.
When the output size option (-s, -S) is not specified, scaling will be executed taking one pixel of the
TIFF data as one pixel of the multifunction printer.
If the print position option (-lleft bottom) specifies a point beyond the printable area of the
multifunction printer, data beyond the printable area will not be printed.

dellpsif (Linux)

Format