Copy Printer Settings - Dell 2130cn User Manual

IKE
Pre-Shared Key
Re-enter Pre-Shared Key
IKE SA Lifetime
IPsec SA Lifetime
DH Group
PFS
Remote peers IPv4 address
Remote peers IPv6 address
Non IPsec communication policy Selects whether or not to communicate with a device which does not support IPsec.
NOTE: If IPsec is enabled with incorrect settings, you must disable it using the IPsec menu on the operator panel.
802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
NOTE: This item is only displayed when the optional network protocol adapter is installed, and also when the optional wireless printer adapter is not
installed.
Values:
Enable IEEE 802.1x
Authentication Method
Login Name: (Device Name) Specifies the login name (device name) for IEEE 802.1x authentication using up to 128 alphanumeric characters.
Password
Re-enter Password
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize the printer's NVRAM from Reset Defaults in the
Printer Settings menu.
Values:
Initialize NIC NVRAM Memory and restart
printer.
Restart Printer

Copy Printer Settings

The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages.
Copy Printer Settings
Purpose:
To copy the printer settings to one or more of the same model of the printer.
To copy the settings to another printer, specify the IP address and password of the printer to which the settings are copied in the IP Address text box and
Password text box. Then, click the Copy the settings to the Host in the above list. button. Copying the settings is complete. The connection time-out period is
60 seconds. After that, you can check whether the settings were copied to this page. And you need to click the Copy the settings to the Host in the above list
and reboot the machine button of the Dell Printer Configuration Web Tool in the destination printer to verify if the settings were actually copied or not.
If the settings can be copied but printer configuration is different, the settings of only the same items are copied. Printer settings are simultaneously copied to
printers of up to 10 IP addresses.
Copy Printer Settings Report
Downloaded from ManualsPrinter.com Manuals
Use a pre shared key for IKE authentication.
Specifies a shared key.
Enter the shared key again to confirm it.
Sets the lifetime for IKE SA from 5 to 28800 minutes.
Sets the lifetime for IPsec SA from 5 to 2880 minutes.
Selects the DH group.
Selects the check box to enable the PFS setting.
Specifies the IP address to connect to.
Specifies the IP address to connect to.
Select the check box to enable IEEE 802.1x authentication.
EAP-MD5
EAP-MS-CHAPv2 Select the authentication method to use for IEEE 802.1x authentication.
PEAP/MS-CHAPv2
Specifies the login password for IEEE 802.1x authentication using up to 128 alphanumeric characters.
Enter the login password again to confirm it.
Click the Start button to initialize NVRAM. Network settings will revert to the factory default settings and reboot
the network capability.
Click the Start button to reboot the printer.