Standard Features - NEC BladeServer Express5800 Series User Manual

STANDARD FEATURES

High performance
Dual-core Intel
Quad-core Intel
DDR2-667 SDRAM FB-DIMM
High-speed 1000BASE-T interface x4
(1Gbps supported)
High-speed disk access (SAS)
Management Utilities
NEC ESMPRO
NEC DianaScope
Remote monitoring feature
(EXPRESSSCOPE engine)
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
Xeon Processor
® ®
Xeon Processor
® ®
Expandability
Four mezzanine card slots
48GB maximum memory capacity
Up to two processors
Four network ports
Up to six hard disk drives (SAS 2.5-inch)
Two USB 2.0 interface ports
High-reliability
Memory monitoring feature (correction of
correctable error/detection of
uncorrectable error)
CPU degradation feature (logical
isolation of a failed device)
Bus parity error detection
Temperature detection
Error notification
Internal voltage monitoring feature
BIOS password feature
Auto-rebuild feature (hot-swappable)
Available Features
Software power-off
Remote power-on feature
AC-Link feature
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Easy Setup
NEC EXPRESSBUILDER (system
management tools)
SETUP (BIOS setup utility)
Disk array configuration utility
General Description 2-3