Hostraid Setup Flow - NEC Express5800 120Lh User Manual

HostRAID Setup Flow

The flowchart below shows the HostRAID system setup procedure.
Start
Is HostRAID used as
boot disk?
Yes
Enable the HostRAID
feature and create RAID by
using SCSISelect Utility
Refer to SCSISelect
Utility User's Manual.
Install driver
(install OS).
See Appendix D or E of
this guide.
Update system.
See this chapter.
Install ASM.
See ASMBE User's
Guide
Install Standby/Hibernation
Lock driver.
See appendix of ASMBE
User's Guide
End
*1 You can create RAID by using the NEC EXPRESSBUILDER. In this case, only you need to do is to
set the HostRAID feature to "Enabled" by using SCSISelect Utility.
*2 ASMBE User's Guide: Adaptec Storage Manager - Browser Edition User's Guide.
You may view or print the SCSISelect Utility User's Manual and Adaptec Storage Manager
Browser Edition User's Guide from the NEC EXPRESSBUILDER CD-ROM.
Installing the Operating System with Express Setup 5-45
No
*1
*2
.
*2
.
Enable the HostRAID
feature and create RAID
by using SCSISelect
Utility
Refer to SCSISelect
Utility User's Manual.
Install driver.
Create the support disk
by using NEC
EXPRESSBUILDER
and install the HostRAID
driver with the Windows
hardware wizard.
Install ASMBE.
See ASMBE User's
*2
Guide .
Install
Standby/Hibernation
Lock driver.
See appendix of ASMBE
*2
User's Guide
End
*1
.
TM
-