Auto Acquire - Barco PDS User Manual

•
^ìíç=^ÅèìáêÉ
The Auto Acquire field is only adjustable between
to INPUT in the User Preference Menu (refer to the
page 58).
When Auto Acquire is ON, and an input has a saved configuration file, the system
attempts to use the saved file. If the input timing matches the timing in the saved
configuration file, the saved file is used.
The system always performs a full sync (timing) acquisition on the selected input signal
under the following conditions:
•
•
•
•
When Auto Acquire is ON, and the input source is non-digital, the system uses the
following library search order:
•
•
•
When Auto Acquire is ON, and the input source is digital, the system uses the following
search order:
•
•
PDS • User's Guide
When the following formats are detected as either SD-SDI, HD-SDI, or 3G-SDI,
only [SMPTE] is shown.
~ NTSC (480i)
~ PAL (576i)
~ 1280x720p @50
~ 1280x720p @59.94
~ 1280x720p @60
~ 1920x1080p @23.98
~ 1920x1080p @24
~
1920x1080p @25
~ 1920x1080p @29.97
~ 2048x1080p @23.98
~ 2048x1080p @25
~ 2048x1080p @30
~ 2048x1080p @48
~ 2048x1080p @59.94
When an input without a saved configuration file is selected
When the input type is changed
When the input signal's sync rate is changed
When an input with a saved configuration file is selected, but the input timing is
different from the saved configuration
Saved configuration files defined in the File Association Menu for each input
channel
The user's library of saved files
A best guess
Saved configuration files defined in the File Association Menu for each input
channel
The user's library of saved files
4. Operation
~ 1920x1080p @30
~ 1920x1080sF@23.98
~ 1920x1080sF@24
~ 1920x1080i @50
~ 1920x1080i @59.94
~ 1920x1080i @60
~ 1920x1080p @50
~
1920x1080p @59.94
~ 1920x1080p @60
~ 2048x1080p @24
~ 2048x1080p @29.97
~ 2048x1080p @47.95
~ 2048x1080p @50
~ 2048x1080p @60
and when Auto Acquire is set
ON OFF
"User Preference Menu" section on
Setup Menu
39