Processing - Barco PDS User Manual

pjmqb=`çäçê=_~ä~åÅÉ=jÉåì
If the current input's colorspace is set to SMPTE, the Color Balance Menu appears:
CO L O R B A L A N C E
> Sat urat i on
Figure 4-16. Color Balance Menu (SMPTE sample)
Please note:
•
•
•
mêçÅÉëëáåÖ
From the Input Menu, select Processing to display the Processing Menu:
PR O CE SS I NG
> Sync Sel
Figure 4-17. Processing Menu (sample)
The following functions are available:
•
•
PDS • User's Guide
Hu e
Re se t A l l
Saturation is measured in percentage.
~
Adjustment range
(100% nominal)
Hue is measured in degrees, and is [N/A] for YP
~ range: -90 to +90
Adjustment
Select Reset All to set all values back to their default settings.
Pulld own Comp
Sync Slice
Sync Selection — This function applies only to Analog RGB inputs. The
PDS automatically selects the syncs for digital sources, composite, S-video, and
YP P inputs. For these inputs, the value field indicates [N/A].
b r
The sync choices are Auto, H/V (horizontal/vertical sync), CSync (composite
sync) and SOG (sync on green).
~ In Auto mode, the system finds sync in any of the three possible
sources.
• If one of the sources is chosen, the system uses only that input
as a sync source.
• If the system does not find sync at that source, it acts as if it is in
Auto mode.
~
The default selection for Analog RGB inputs is Auto.
Pulldown Compensation — This function only applies to standard video
(component, s-video, composite and SD/HD SDI) inputs. The mode, which
detects the 3:2 film pulldown sequence, should be turned ON to properly process
video derived from film source material.
100
0
(Composite, S-Video, YP
b
P and SDI inputs.
b r
Au to
O F F
128
4. Operation
Setup Menu
P , SDI): 0% to 150%
r
45