Black; Oavail; Ocsav; Orbm - Barco PDS User Manual

_K==oÉãçíÉ=`çåíêçä
Remote Commands
lìíéìí=`çãã~åÇë
_i^`h=
•
•
•
•
•
l^s^fi
•
•
•
•
l`p^s=
•
•
•
•
•
ldj=
•
•
•
•
•
lo_j=
•
•
138
Description: Set the mixer to output black.
Command Format: BLACK -m (mode)
Parameters: -m (mode): 0 - off, 1 - on
Query Format: BLACK -?
Query Response: BLACK -m (mode) --min 0 --max 1
Description: Query-only command used to identify whether the preview output
mezzanine is installed
Query Format: OAVAIL -o (output) -?
Parameters:
-o (output): 1 - DVI, 3 - Preview DVI
-m (mode): 0 - output not available, 1 - output available
Query Response: OAVAIL -o (output) -m (mode)
Description: Save Output Configuration
Command Format: OCSAV
Parameters: -o output: 1 - DVI, 3 - Preview DVI (PDS-902 only)
Query Format: N/A
Query Response: N/A
Description: Set Output Gamma
Command Format: OGM -o (output) -g (gamma)
Parameters:
-o output: 1 - DVI
-g gamma: 1.0 to 3.0; +0.1 increment (Default: 1.0)
Query Format: OGM -o (output) -?
Query Response: OGM -o (output) -g (gamma) --min 1 -- max 3
Description: Output Raster Box Mode
Command Format: ORBM -o (output) -m (mode)
PDS • User's Guide