In This Chapter; Tech Support Menu; Factory Reset Menu - Barco PDS User Manual

qÉÅÜ=pìééçêí=jÉåì
From the Setup Menu, select Tech Support to display the Tech Support Menu:
TE CH SUPP ORT
Ver s ion
Pho ne
www. barco. co m/ esupport
Figure 4-59. Tech Support Menu
The Tech Support Menu displays the following information:
•
•
•
c~Åíçêó=oÉëÉí=jÉåì
From the Main Menu, select Factory Reset to display the Factory Reset Menu:
Figure 4-60. Factory Reset Menu
This function enables you to reset the PDS to its factory default condition, in which all user-
defined input, output and system configuration files are deleted. When the command is
executed, a confirmation menu is shown.
•
•
The following attributes constitute a "factory default" condition:
•
•
•
•
•
PDS • User's Guide
Version — displays the current version of installed operating firmware. This
number changes when you update system software. In Chapter 6, refer to the
"Firmware Upgrade Overview" section on page 94 for update instructions.
Phone — lists the technical support phone number.
Website Support Address— lists the web address for technical support.
Clear All Saved
C o n fi g u ra t ion s?
< S E L > = Y e s
< E S C > = N o
Press SEL to reset the system.
Press ESC to cancel the operation, and return to the Setup Menu.
Input 1 is on Program.
The Output is set to 1024x768@59.94.
The Output Raster Box is OFF.
The Status Menu is displayed.
All menu items are set to their default values (as specified in this chapter).
01. 00
866-374-7878
4. Operation
Setup Menu
73