Barco PDS User Manual page 88

4. Operation
Setup Menu
•
cáêãï~êÉ=réÖê~ÇÉ=jÉåì
For details about upgrading firmware, see
74
The serial port is set to the following default values:
~ Baud: 115200
~ Parameters: N81 (No Parity, 8 Data Bits, 1 Stop Bit)
~ Handshaking: OFF
When "Reset All, Save EDID" is selected, the unit will return
Note
to a default configuration as noted above, with the exception
of EDID, which will NOT be changed.
"Upgrading Firmware" on page 93.
PDS • User's Guide