Barco PDS User Manual page 52

4. Operation
Setup Menu
^Çàìëí=lå
In the Input Menu, the Adjust On field indicates whether any changes you make using the
Input Menu will be applied to the Preview or Program source.
For example, if you select Preview, as shown in the illustration below, and change the
Background, Color Balance, or other parameters using the Input Menu, you can view
those changes on the Preview source — while the Program source remains unchanged.
I N P U T
> A d j u s t O n
Figure 4-10. Adjust On Field
If both paths are using the same input source, only the selected path is modified.
When LOGO is selected, only the Adjust On and Auto Acquire input menu functions are
available for adjustment.
qóéÉ
In the Input Menu, the Type field shows the currently selected input type, and enables you
to change the type if required. The available types depend on the selected input:
•
•
•
•
`çäçêëé~ÅÉ
From the Input Menu, select Colorspace to change the color space for the selected input
on Program. Values depend on the selected input. Please note:
•
•
•
38
1024x76 8 @59. 94
For inputs 1 - 4: CVBS, Y/C, YPBPR, RGB/HD-YUV
For inputs 5 - 8 (when Digital): DVI
For inputs 5 - 8 (when Analog): CVBS, Y/C, YPBPR, RGB/HD-YUV
For the SDI input: [SDI]
T
he SDI input always shows its type in brackets (e.g., [SDI]),
Note
given that this input type cannot be changed.
The default selection for YP
The Colorspace Menu allows selection between these two values when the input
is analog (excluding CVBS, Y/C) or DVI.
When either the CVBS or Y/C input is selected, only [SMPTE] is shown.
Pr eview
or YUV is SMPTE.
P
b r
PDS • User's Guide