Barco PDS User Manual page 23

aáëéä~ó=pÉÅíáçå
The figure below illustrates the Display Section:
Figure 2-2. Display Section with sample Status Menu
Descriptions of each button and control are provided below:
•
SE TUP
> Inpu t
Figure 2-3. Sample Setup Menu Display
•
•
SEL
PDS • User's Guide
PROGRAM:
1024x768 @59.94
NEXT:
NTSC (480i)
The Menu Display is a 4-line x 20-character Vacuum Fluorescent Display (VFD)
that shows all PDS menus and sub-menus. Brightness is adjustable. The
following illustration shows a typical PDS menu.
Output
Logo
For all setup menus, please note:
~ The top line names the current menu, in all capital letters.
~ The navigation cursor (>) in the left-hand column indicates the current
line on which action can be taken.
~ The double arrow (>>) indicates that a sub-menu is available.
The Status Menu layout is different from the "setup" menu
Note
display. In Chapter 4, refer to the
page 33 for details.
In Chapter 4, refer to the "Menu
the system's menu tree.
ADJUST — use the Adjust Knob to scroll through all system menus.
~ Turn the knob counter-clockwise (CCW) to scroll down.
~ Turn the knob clockwise (CW) to scroll up.
SEL — press to enter the setup menu tree (from the Status Menu), to enter a
sub-menu, change a parameter, accept a parameter, or to answer "Yes" to certain
menu queries.
2. Hardware Orientation
RGB
SDI
Adjust
>>
>>
>>
"Status
Tree" section on page 27 for additional details on
PDS Front Panel
SEL
ESC
Menu" section on
9