Gui Operations On A Pc - Barco PDS User Manual

5. GUI Operations
GUI Connection and Launch
drf=`çååÉÅíáçå=~åÇ=i~ìåÅÜ

Use the following steps to connect a PC, laptop, or mobile device and launch the GUI:
1.
2.
3.
4.
5.
6.
7.
8.
Figure 5-1. Address bar with sample IP address
86
Ensure that your PC (or laptop) uses Windows® 7, Windows® 2000, or Windows
XP. If using a mobile device, ensure that it uses one of the following operating
systems:
~ IOS 4+
~ Android 2.3+
~
Android with Chrome
~ BB OS 6+
~ BB Tablet OS 1+
Ensure that your PC (or laptop) has a web browser installed. The following
browsers are supported:
~ Internet Explorer
®
~ Mozilla Firefox 14+
®
~ Google Chrome
~ Safari
Connect the PDS's Ethernet port to a Switch.
Connect the Switch to your PC (or laptop).
Power-up the PDS.
Note the PDS's current IP address:
From the Status Menu, press SEL to display the Setup Menu.
a.
Select System to display the System Menu.
b.
Select Ethernet to display the Ethernet Menu.
c.
Make a note of the information on the IP line, which shows the current IP
d.
address in all modes (with DHCP on or off).
The default IP address is 192.168.0.10.
Note
On your PC (or laptop), open up a web browser.
In the browser's address bar, enter the PDS's IP address as shown in the
following illustration.
Avoid using leading zeros in the IP address. If your display
Note
panel shows 192.168.000.010, for example, type the address
as shown in the preceding illustration, not as shown on the
display.
®
®
10+
Version 19.0+
PDS • User's Guide