Output Menu; > M A I N; Output Format; Test Pattern - Barco PDS User Manual

4. Operation
Setup Menu
lìíéìí=jÉåì
From the Setup Menu, select Output to display the Output Menu.
OUTPUT
> M a i n
Figure 4-24. Output Menu (sample)
Following are descriptions of each Output Menu function:
•
•
j~áå
Following are descriptions of each Output Menu function:
•
•
•
•
•
•
lìíéìí=cçêã~í
From the Output Menu, select the top Output Format line to view or change the current
output format. This line indicates the format in the following form:
The output format for the PDS can be set to any of the progressive outputs.
qÉëí=m~ííÉêå
From the Output Menu, select Test Pattern to display the Test Patterns Menu:
TE ST P AT TERN
> M o d e
Figure 4-25. Test Patterns Menu (sample)
The following functions are available on the menu:
•
50
Pr eview
Main

Preview Menu (PDS 902 Only)

Output Format

Test Pattern

Output Adjust

Sync Settings

Gamma

Save Config

Hact x Vact @ Vr Hz
The output format is not updated until SEL is pressed.
Note
T yp e
Ra st er B ox
Mode — This function enables or disables the test pattern generator.
>>
>>
O N
Bu rst
O F F
PDS • User's Guide