Osync; Otpm; Otpt - Barco PDS User Manual

_K==oÉãçíÉ=`çåíêçä
Remote Commands
•
•
•
lpvk`=
•
•
•
•
•
•
•
lqmj=
•
•
•
•
•
lqmq=
•
•
•
•
140
Query Response: OSRC -s (source)
List Format: OSRC --list
List Response:
0:"Preview"
1:"Program"
Description: Output Sync Type Adjust.
Command Format: OSYNC -o (output) -s (sync)
Parameters:
-o output: 1 - DVI, 2- Analog, 3 - Preview DVI, 4 - Preview Analog
(3 and 4 are for PDS-902 only)
-s (sync): 1 = +H+V, 2 = +H-V, 3 = -H+V, 4 = -H-V, 5=CSync for analog
only (Defaults: DVI: +H+V, analog: based on Output Format selected)
Query Format: OSYNC -o (output) -?
Query Response: OSYNC -o (output) -s(sync) --min 1 --max 4 (max returned for
analog is 5)
List Format: OSYNC -o (output) --list
List Response:
1:"+H+V"
2:"+H-V"
3:"-H+V"
4:"-H-V"
5:"CSync" (returned for analog only)
Description: Output Test Pattern Mode
Command Format: OTPM -o (output) - m (mode)
Parameters:
-o output: 1 - DVI, 3 - Preview DVI (PDS-902 only)
-m (mode): 0 - off, 1 - on
Query Format: OTPM -o (output) -?
Query Response: OTPM -o (output) - m (mode) --min 0 -- max 1
Description: Output Test Pattern Type
Command Format: OTPT -o (output) - t (type)
Parameters: -o output: 1 - DVI, 3 - Preview DVI (PDS-902 only)
-t (type): 1 - H Ramp
2 - V Ramp
PDS • User's Guide