Barco PDS User Manual page 38

4. Operation
Control Overview
`çåíêçä=lîÉêîáÉï
There are several ways to control the PDS:
•
•
•
mçïÉêJré=fåáíá~äáò~íáçå
After connecting power to the PDS, locate the power switch on the back of the chassis, and
turn power ON. While the system is initializing, the following messages are displayed:
Figure 4-1. System Initialization Message 1 (sample)
Figure 4-2. System Initialization Message 2 (sample)
Figure 4-3. System Initialization Message 4 (sample)
The "version" line in the above menu shows the software version that is currently installed.
This version number changes as software upgrades are released.
When you first start up a PDS that has stored logos, a message like the one in the following
24
The front panel is ideal for all basic operations. Available controls include the
Display Section and the buttons in the Inputs Section and the Effects Section.
The built-in web-based GUI is ideal for intuitive point-and-click operations. Refer
to Chapter 5, "GUI Operations" on page 85 for additional details.
The PDS can also be controlled remotely via Ethernet or Serial communications.
See Appendix B "Remote
I n i t i a l i z i n g
.. .
P r o g r a m L o a d i n g
ple ase wait...
P DS - 9 0 2
Ba rco
V e r s i o n 1 . 0
I n i t i a l i z i n g . . .
Control" on page 113 for additional details.
PDS • User's Guide